Fetches the gain of the DUT as function of the frequency and input power.


icon

Inputs/Outputs

  • cdatavalref.png PAE Reference In —

    Specifies the session reference handle of the PAE measurement session.

  • cerrcodeclst.png error in —

    Error conditions that occur before this node runs. This input provides standard error in functionality.

  • idatavalref.png PAE Reference Out —

    Returns the session reference handle of the PAE measurement session.

  • i1dnclst.png Gain (Linear Range) Per Frequency —

    Gain (Linear Range) Per Frequency Returns the gain (linear range) versus frequency plot.

  • idbl.png Frequency Levels (Hz) —

    The frequency the measurement was performed at.

  • idbl.png Gain (Linear Range) (dB) —

    The gain of the DUT. The gain is calculated using measurements where the RF power at the DUT input port is less than Maximum Linear Range (dBm).

  • i1dcclst.png Gain —

    Gain Returns a 1D array of plots of gain versus RF power at the DUT input port. Each plot corresponds to one frequency in the frequency sweep.

  • i1ddbl.png Input Power (dBm) —

    The list of input powers (RFSG Power) used to excite the DUT.

  • i1ddbl.png Gain (dB) —

    The measured gain of the DUT. Each element of the array is the gain at the corresponding input power from Input Power (dBm).

  • i1ddbl.png Frequencies —

    The frequency points the measurement was performed at. The index into this array corresponds to the index into the Gain array.

  • ierrcodeclst.png error out —

    Error information. This output provides standard error out functionality.