Fetches the averaged RF power and the averaged DC power of the measurement.


icon

Inputs/Outputs

  • cdatavalref.png PAE Reference In —

    Specifies the session reference handle of the PAE measurement session.

  • cerrcodeclst.png error in —

    Error conditions that occur before this node runs. This input provides standard error in functionality.

  • idatavalref.png PAE Reference Out —

    Returns the session reference handle of the PAE measurement session.

  • i1dcclst.png Averaged RF Power —

    Returns a 1D array of plots of RF power at DUT output port against RF power at DUT input port. Each plot in the array corresponds to one frequency in the frequency sweep.

  • i1ddbl.png Input Power (dBm) —

    The list of input powers (RFSG Power) used to excite the DUT.

  • i1ddbl.png Averaged Power (dBm) —

    Returns a 1D array of power averaged across the measurement interval. Each element in the array is the average output power of the DUT at the corresponding input pwer from Input Power (dBm).

  • i1dcclst.png Averaged DC Power —

    Averaged DC Power Returns a 1D array of plots of DC power against the RF power at the DUT input port. Each plot in the array corresponds to one frequency in the frequency sweep.

  • i1ddbl.png Input Power (dBm) —

    The list of input powers (RFSG Power) used to excite the DUT.

  • i1ddbl.png Averaged Power (Watt) —

    Returns a 1D array of power averaged across the measurement interval. Each element in the array is the average DC power at the corresponding input pwer from Input Power (dBm).

  • i1ddbl.png Frequencies —

    The frequency points the measurement was performed at. The index into this array corresponds to the index into the Averaged RF Power array and the Averaged DC Power array.

  • ierrcodeclst.png error out —

    Error information. This output provides standard error out functionality.