Defines the path losses between the RF OUT connector of the signal generator and the input of the device under test.

Configure RFSG Constant Attenuation VI
Specifies a single value to compensate for external attenuation at all frequencies and power levels.
Configure RFSG Attenuation (XML File) VI
Specifies the absolute path to the RFSG system calibration XML file created using the RF System Calibration Assistant. Use the RF System Calibration Assistant to save multiple generator path calibrations in a single xml file. Specify the path to use with the RFSG Attenuation Path Name input. Although the RF System Calibration Assistant allows you to calibrate one path at multiple power levels for the same frequency, this API only supports calibrations done at one power level for each frequency. This function returns an error if you do not wire the RFSG XML File Path input or specify an empty or relative path.
Configure RFSG Attenuation (S2P File) VI
Defines the path losses between the RF OUT connector of the signal generator and the input of the device under test using a S2P file.

Parent topic: Configuration

Power-Added Efficiency Measurement Library LabVIEW VI Reference

Log in to get a better experience