Configures the trigger that synchronizes the DCPower measurement to the RFmx measurement.

Configure RFmx to DCPower Trigger (Automatic Routing) VI
When the RF mode is Pulsed CW, this method uses dynamic routing to set the RFmx reference trigger as the input to the DCPower measure trigger using an available PXI backplane trigger line. When the RF mode is CW, this method does not export the RFmx reference trigger or configure a DCPower measure trigger. RFmx exports the reference trigger when it takes a measurement. DCPower waits for the measure trigger before taking each measurement.
Configure RFmx to DCPower Trigger (Manual Routing) VI
Configures the trigger to synchronize the DCPower measurement to the RFmx measurement. The terminals on this VI are used for the RFmx Reference Trigger Output Terminal and the DCPower Measure Trigger Input Terminal terminals. RFmx exports the reference trigger when it takes a measurement. DCPower waits for the measure trigger before taking each measurement.

Parent topic: Configuration

Power-Added Efficiency Measurement Library LabVIEW VI Reference

Log in to get a better experience