imgSessionSetUserLUT16bit
- Updated2023-02-21
- 2 minute(s) read
Usage
rval imgSessionSetUserLUT16bit(SESSION_ID sid, uInt32 lutType, uInt16* lut);
Purpose
Downloads a custom 16-bit lookup table (LUT) to the image acquisition device. Call this function at least once with the default constant (IMG_LUT_TYPE_DEFAULT) to initialize all LUTs, or make successive calls using different constants for each LUT. You also can override the default LUT on a per-tap basis. This function works with analog and digital cameras featuring 10-, 12-, 14-, or 16-bit pixel depths.
 |
Note User LUTs are not supported on the NI 1405, NI 1426, NI 1427, NI 1429, NI 1430, NI 1433, or the NI 1435. |
Parameters
| Name | Type | Direction |
| sid | SESSION_ID | input |
| lutType | uInt32 | input |
| lut | uInt16* | input |
| rval | Int32 | output |
Parameter Discussion
sid: valid SESSION_ID.
lutType: type of LUT to be written. The following are valid values for this parameter:
| IMG_LUT_TYPE_DEFAULT | Default LUT used to initialize all LUTs. |
| IMG_LUT_TYPE_TAP0 | Tap 0 LUT for digital devices. |
| IMG_LUT_TYPE_TAP1 | Tap 1 LUT for digital devices. |
lut: array that contains the LUT to be downloaded to the image acquisition device. This array must contain 2n elements where n is the bit depth of the camera (1,024 for 10-bit cameras, 2,048 for 12-bit cameras, and so on).
Return Value
This function returns 0 on success. On failure, this function returns an error code. For information about the error code, call imgShowError.