niHSDIO_ConfigureWaveformToGenerate
- Updated2023-02-21
- 1 minute(s) read
ViStatus = niHSDIO_ConfigureWaveformToGenerate ( ViSession vi, ViConstString waveformName);
Purpose
Specifies the name of a previously allocated or written waveform to be generated after a call to the niHSDIO_Initiate function when the NIHSDIO_ATTR_GENERATION_MODE attribute is set to NIHSDIO_VAL_WAVEFORM. This function need only be called if multiple waveforms are present in onboard memory (refer to the NIHSDIO_ATTR_WAVEFORM_TO_GENERATE attribute for more information).
Related topics:
Parameters
| Input | ||
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi was obtained from the niHSDIO_InitAcquisitionSession or niHSDIO_InitGenerationSession function. |
| Waveform Name | ViConstString | Specifies which waveform to generate upon calling niHSDIO_Initiate. |
Return Value
| Name | Type | Description | ||||||||
| Status | ViStatus | Reports the status of this operation. To obtain a text description of the status code, call the niHSDIO_error_message function. To obtain additional information concerning the error condition, use the niHSDIO_GetError and niHSDIO_ClearError functions. The general meaning of the status code is as follows:
|