Assign Dynamic Channels
- Updated2023-02-17
- 2 minute(s) read
Assign Dynamic Channels
Configures channels for dynamic acquisition (if session in is an acquisition session) or dynamic generation (if session in is a generation session).
Inputs/Outputs
session in
Instrument session obtained from the Initialize Acquisition Sessionnode, the Initialize Generation Sessionnode, or the Initialize External Calibrationnode.
channel list
The channels reserved for dynamic operation.
Examples of valid syntax for this control are 0:31 or 0-15,16-31 or 0-30,31. The order of these channels specifies the order when using the waveform data type instances of the niHSDIO Read Waveform and niHSDIO Write Named Waveformnodes.
Leave channel list blank to specify all channels. Use none to unassign all channels.
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
session out
Handle that identifies the session in all subsequent node calls.
The session out parameter is obtained from the Initialize Acquisition Sessionnode or the Initialize Generation Sessionnode.
error out
Error information.
The node produces this output according to standard error behavior.