Configure Event Voltage Logic Family

Configures the voltage levels for the event channels using a logic family.

Refer to the device documentation for descriptions of logic families and possible voltage restrictions.

Note The default logic level for all supported devices in acquisition and generation sessions is 3.3V.

Inputs/Outputs

datatype_icon

session in

Instrument session obtained from the Initialize Acquisition Sessionnode, the Initialize Generation Sessionnode, or the Initialize External Calibrationnode.

datatype_icon

logic family

The specified settings for the instrument generation and acquisition operations.

Note Your device may not support all of the following values. To view all valid logic families for your device, refer to the specifications document for your device.
5.0V Logic

Uses 5.0 V logic family.

3.3V Logic

Uses 3.3 V logic family.

2.5V Logic

Uses 2.5 V logic family.

1.8V Logic

Uses 1.8 V logic family.

1.5V Logic

Uses 1.5 V logic family.

1.2V Logic

Uses 1.2 V logic family.

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Default value: No error

datatype_icon

session out

Handle that identifies the session in all subsequent node calls.

The session out parameter is obtained from the Initialize Acquisition Sessionnode or the Initialize Generation Sessionnode.

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior