Writes WDT data to the waveform in onboard memory. If streaming is enabled, you can write more data than the allocated waveform size in onboard memory. Refer to the Streaming topic for more information about streaming data.


icon

Inputs/Outputs

  • cbool.png Use Waveform dT for Sample Rate —

    Use Waveform dT for Sample Rate specifies whether the sample rate should be set to match the sampling information contained in the Waveform parameter.

  • cmsdt.png Waveform —

    Waveform specifies the data you want to use for the arbitrary waveform.

  • civrn.png Instrument Handle —

    Instrument Handle identifies a particular instrument session.

    Instrument Handle is obtained from the niFgen Initialize VI, niFgen Initialize With Options VI, or the niFgen Initialize With Channels VI.

  • cstr.png Channel Name —

    Channel Name specifies the channel that this VI uses.

  • ci32.png Waveform Handle —

    Waveform Handle specifies the handle of the arbitrary waveform previously allocated with the niFgen Allocate Waveform VI.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

    Default value: no error

  • iivrn.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your instrument session to the next VI.

  • ii32.png Waveform Handle Out —

    Waveform Handle Out returns the handle that identifies the waveform.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.