Creates an onboard waveform from WDT data for use in Arbitrary Waveform or Arbitrary Sequence output mode. The Waveform Handle returned by the VI can be used later for setting the active waveform, changing the data in the waveform, building sequences of waveforms, or deleting the waveform when it is no longer needed.


icon

Inputs/Outputs

  • cbool.png Use Waveform dT for IQ Rate —

    Use Waveform dT for IQ Rate specifies whether the I/Q rate should be set to match the sampling information contained in the Waveform parameter.

  • civrn.png Instrument Handle —

    Instrument Handle identifies a particular instrument session.

    Instrument Handle is obtained from the niFgen Initialize VI, niFgen Initialize With Options VI, or the niFgen Initialize With Channels VI.

  • cstr.png Channel Name —

    Channel Name specifies the channel that this VI uses.

  • cmsdt.png Waveform —

    Waveform specifies the data you want to use for the arbitrary waveform.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

    Default value: no error

  • iivrn.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your instrument session to the next VI.

  • ii32.png Waveform Handle —

    Waveform Handle returns a handle that identifies the waveform.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.