niFgen Configure Arbitrary Sequence VI

Offset specifies the value the signal generator adds to the arbitrary waveform.

When you create an arbitrary waveform, you must first normalize the data points to a range of -1.00 to +1.00. You can use this parameter to shift the range of the arbitrary waveform.

For example, to configure the output signal to range from 0.00 V to 2.00 V instead of -1.00 V to 1.00 V, set Offset to 1.00.

Units: volts (V)

Instrument Handle identifies a particular instrument session.

Instrument Handle is obtained from the niFgen Initialize VI, niFgen Initialize With Options VI, or the niFgen Initialize With Channels VI.

Channel Name specifies the channel that this VI uses.

Sequence Handle specifies the handle of the arbitrary sequence to produce.

You can create multiple arbitrary sequences using the niFgen Create Arbitrary Sequence VI or the niFgen Create Advanced Arb Sequence VI. These VIs return a handle that you use to identify each sequence. Specify a value of -1 to clear all sequences.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Default value: no error

Gain specifies the factor by which the signal generator scales the arbitrary waveforms in the sequence.

When you create an arbitrary waveform, you must first normalize the data points to a range of -1.00 to +1.00. You can use this parameter to scale the waveform to other ranges. The gain is applied before the offset is added.

For example, to configure the output signal to range from -2.00 V to +2.00 V, set Gain to 2.00.

Units: unitless

Instrument Handle Out passes a reference to your instrument session to the next VI.

error out contains error information. This output provides standard error out functionality.