Use the NI-FGEN Waveform Control VIs to configure and control the generation of standard functions, arbitrary waveforms, arbitrary sequences, frequency lists, and scripts on your signal generator.

niFgen Configure Output Mode VI
Configures the output mode of the signal generator. The output mode determines how the signal generator produces waveforms. For example, you can select to generate a standard waveform, an arbitrary waveform, or a sequence of arbitrary waveforms.
Standard Waveform
Use the NI-FGEN Standard Waveform VIs to configure, define, and clear a standard waveform.
Frequency List
Use the NI-FGEN Frequency List VIs to configure, define, and clear a frequency list.
niFgen Commit VI
Causes a transition to the Committed state. This VI verifies property values, reserves the device, and commits the property values to the device. If the property values are all valid, NI-FGEN sets the device hardware configuration to match the session configuration.
niFgen Initiate Generation VI
Initiates signal generation. If you want to abort signal output, call the niFgen Abort Generation VI. Call this VI to cause the signal generator to produce a signal again.
niFgen Abort Generation VI
Aborts any previously initiated signal generation. Call the niFgen Initiate Generation VI to initiate signal generation.
niFgen Configure Channels VI
Configures the channels that are used with the instrument specified in Instrument Handle. If you call this VI, you must call it immediately after initializing your session and before configuring any properties or writing data.
Arbitrary Waveform
Use the NI-FGEN Arbitrary Waveform VIs to configure, define, and clear an arbitrary waveform.
Arbitrary Sequence
Use the NI-FGEN Arbitrary Sequence VIs to configure, define, and clear an arbitrary sequence.
Script
Use the NI-FGEN Script VIs to create, configure, and clear scripts.
niFgen Is Done VI
Determines whether the current generation has completed. This VI sets the Done parameter to be TRUE if the session is in the Idle or Committed states.
niFgen Wait Until Done VI
Waits until the device is done generating or until the maximum time has expired.

Parent topic: NI-FGEN

NI-FGEN LabVIEW VI Reference

Log in to get a better experience