NIFGEN_ATTR_FUNC_START_PHASE
- Updated2023-02-21
- 1 minute(s) read
IviFgenStdFunc Attribute
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1250105 | ViReal64 | R/W | Channel | None | niFgen_ConfigureStandardWaveform |
Description
Controls horizontal offset of the standard waveform the signal generator produces. Specify this attribute in degrees of one waveform cycle.
A start phase of 180 degrees means output generation begins halfway through the waveform. A start phase of 360 degrees offsets the output by an entire waveform cycle, which is identical to a start phase of 0 degrees.
 |
Note This parameter does not affect signal generator behavior when you set the waveform parameter of the niFgen_ConfigureStandardWaveform function to NIFGEN_VAL_WFM_DC. |
Units: Degrees of one cycle
Default Value: None