Installing the NI ELVIS RIO CM

What to Use

  • Hardware
    • NI ELVIS II Series Workstation
    • NI ELVIS II Series AC/DC power supply
    • USB 2.0 A-to-B (Angled) Cable
    • M4 mounting screws
    • Computer
  • Software

    • NI LabVIEW 2016 ELVIS RIO Control Software Bundle

  • Tools
    • Screwdriver, Phillips #1

What to Do

Note Refer to the NI ELVIS RIO Control Module User Manual and the NI ELVIS II Series User Manual on ni.com/manuals to identify ports and connectors.
  1. Position the NI ELVIS RIO CM on the NI ELVIS II Series Workstation.
    1378
  2. Slide the Workstation Interface Connector of the NI ELVIS RIO CM into the Prototyping Board Connector on the workstation and ease it into place.
    1378
  3. Secure the NI ELVIS RIO CM to the workstation using two M4 mounting screws.
    1378