Use the NI-DMM External Calibration VIs to perform an external calibration on the DMM.

niDMM Initialize External Cal VI
The following operations are performed if the Calibration Password is valid:
niDMM Close External Cal VI
Performs the specified Action, closes the specified external calibration session obtained from niDMM Initialize External Cal, and deallocates resources that it reserved.
niDMM Cal Adjust Gain VI
Calibrates the gain coefficient for the supplied Function, Range, and Input Resistance.
niDMM Cal Adjust Offset VI
Calibrates the offset and Auto Zero offset for the supplied Function, Range, and Input Resistance.
niDMM Cal Adjust AC Filter VI
Calibrates the filter coefficients used for AC measurements of the supplied Function and Range.
niDMM Cal Adjust Linearization VI
(NI 4065 only) Compensates for any non-linearities.
niDMM Cal Adjust Miscellaneous VI
Performs a specialized calibration step depending on the specified Type.
niDMM Cal Adjust LC VI
(NI 4082 and NI 4072 only) Performs a specialized LC calibration step depending on the specified Stage.

Parent topic: Calibration

NI-DMM LabVIEW VI Reference

Log in to get a better experience