NIDMM_ATTR_TRIGGER_DELAY
- Updated2023-02-21
- 1 minute(s) read
Specific Attribute
| Data type |
Access | Coercion | High-Level Function |
|---|---|---|---|
| ViReal64 | R/W | None | None |
Description
Specifies the time (in seconds) that the DMM waits after it has received a trigger before taking a measurement. The default value is AUTO DELAY (-1), which means that the DMM waits an appropriate settling time before taking the measurement. (–1) signifies that AUTO DELAY is on, and (–2) signifies that AUTO DELAY is off.
The NI 4080/4081/4082 uses the value specified in this attribute as additional settling time. The valid range for Trigger Delay is 0.0 - 10.0 seconds, and the onboard timing resolution is 10.0 ns.
The NI 4065, NI 4070/4071/4072, and NI 4080/4081/4082 use the value specified in this attribute as additional settling time. For the The valid range for Trigger Delay is AUTO DELAY (-1) or 0.0-149.0 seconds and the onboard timing resolution is 34.72 ns.
Use positive values to set the trigger delay in seconds.