NIDMM_ATTR_SAMPLE_INTERVAL
- Updated2023-02-21
- 1 minute(s) read
Specific Attribute
| Data type |
Access | Coercion | High-Level Function |
|---|---|---|---|
| ViReal64 | R/W | None | niDMM_ConfigureMultiPoint |
Description
Specifies the amount of time in seconds the DMM waits between measurement cycles. This attribute only applies when the NIDMM_ATTR_SAMPLE_TRIGGER attribute is set to INTERVAL. The default value (–1) ensures that the DMM settles for a recommended time, which is the same as using an immediate trigger.
The NI 4065, NI 4070/4071/4072, and the NI 4080/4081/4082 use the value specified in this attribute as additional delay. On these devices, the onboard timing resolution is 34.72 ns and the valid range is 0–149 s.
Only positive values are valid when setting the sample interval.