Adjust LC Calibration
- Updated2023-02-17
- 2 minute(s) read
Adjust LC Calibration
Performs a specialized LC calibration step.
Refer to the calibration procedure for your DMM before using this node.
Inputs/Outputs
session in
Instrument identifier from previous NI-DMM nodes.
Default value: None
stage
LC calibration step to perform.
| L & C Open | Calibrates the open compensation. |
| L & C Short | Calibrates the short compensation. |
| L & C 25 Ω | Calibrates the 25 Ω resistance. |
| L & C 1 kΩ | Calibrates the 1 kΩ resistance. |
| L & C 5 kΩ | Calibrates the 5 kΩ resistance. |
| L & C 100 kΩ | Calibrates the 100 kΩ resistance. |
Default value: L & C Open
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
session out
Instrument identifier for subsequent NI-DMM nodes.
error out
Error information.
The node produces this output according to standard error behavior.
Hardware Support
This node is only supported for the PXIe-4082 and PXI-4072.