niDigital_PPMU_ConfigureVoltageLevel
- Updated2023-11-24
- 1 minute(s) read
niDigital_PPMU_ConfigureVoltageLevel
DC Voltage Group
Configures the voltage level the PPMU outputs to the DUT. You must call the niDigital_PPMU_Source function for changes to the PPMU configuration to take effect, even if the PPMU is already sourcing.
C Function Prototype: ViStatus niDigital_PPMU_ConfigureVoltageLevel (ViSession vi, ViConstString channelList, ViReal64 voltageLevel)
| Parameter | Description |
|---|---|
| vi | The specified instrument session the niDigital_init or niDigital_InitWithOptions function returns. |
| channelList | List of channel names or list of pins. Do not pass a mix of channel names and pin names. An empty string denotes all digital pattern instrument channels.
Pin names and pin groups apply to all enabled sites, unless the pin name explicitly specifies the site. You can specify a pin in a specific site using the form siteN/pinName, where N is the site number. This function ignores pins that are not mapped to the digital pattern instrument. Specify channel names using the form PXI1Slot3/0,2-3 or PXI1Slot3/0,PXI1Slot3/2-3, where PXI1Slot3 is the instrument resource name and 0, 2, 3 are channel names. To specify channels from multiple instruments, use the form PXI1Slot3/0,PXI1Slot3/2-3,PXI1Slot4/2-3. The instruments must be in the same chassis. |
| voltageLevel | Voltage level that the PPMU forces to the DUT pin. |
Return value: Reports the status of the operation.