Configure Time Set Edge
- Updated2023-02-17
- 2 minute(s) read
Configure Time Set Edge
Configures the edge placement for the pins specified in the pin list.
Inputs/Outputs
session in
Instrument session obtained from the niDigital Initialize with Optionsnode.
pin list
List of pin and pin group names for which to configure the time set edges.
time set
The specified time set name.
edge
Name of the edge.
| NIDIGITAL_VAL_DRIVE_ON | 2800 |
| NIDIGITAL_VAL_DRIVE_DATA | 2801 |
| NIDIGITAL_VAL_DRIVE_RETURN | 2802 |
| NIDIGITAL_VAL_DRIVE_OFF | 2803 |
| NIDIGITAL_VAL_COMPARE_STROBE | 2804 |
| NIDIGITAL_VAL_DRIVE_DATA_2 | 2805 |
| NIDIGITAL_VAL_DRIVE_RETURN_2 | 2806 |
| NIDIGITAL_VAL_COMPARE_STROBE_2 | 2807 |
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
time
The time from the beginning of the vector period in which to place the edge.
session out
Handle that identifies the session in all subsequent NI-Digital node calls.
error out
Error information.
The node produces this output according to standard error behavior.