Specifies the pulse current limit range, in amps, for the specified channel(s).

The range defines the valid values to which you can set the pulse current limit and pulse bias current limit .

This property is applicable only if the Output Function property is set to Pulse Voltage .

Note The channel must be enabled for the specified pulse current limit to take effect. Refer to the Output Enabled property for more information about enabling the channel.
Note Refer to Supported Properties by Device for information about supported devices.

Remarks

The following table lists the characteristics of this property.

Short Name Pulse Current Limit Range
Data type cdbl.png
Permissions Read/Write
High-level VIs niDCPower Configure Pulse Current Limit Range
Channel-based Yes
Instrument-based No
Resettable No