Asserts the specified trigger. This VI can override an external edge trigger.

Note This VI is not supported by all devices. Refer to Supported VIs by Device for information about supported devices.


icon

Inputs/Outputs

  • civrn.png instrument handle —

    instrument handle identifies a particular instrument session.

  • cstr.png channel name —

    channel name specifies the channel(s) to use. Specify the channel(s) using the form PXI1Slot3/0,PXI1Slot3/2-3,PXI1Slot4/2-3 or PXI1Slot3/0,PXI1Slot3/2:3,PXI1Slot4/2:3, where PXI1Slot3 and PXI1Slot4 are instrument resource names and 0, 2, and 3 are channels.

    If you do not wire this parameter, all channels in the session are used.

  • ci32.png signal —

    signal specifies which trigger to override.

    Start Trigger (1034)

    Overrides the Start trigger.
    Source Trigger (1035)

    Overrides the Source trigger.
    Measure Trigger (1036)

    Overrides the Measure trigger.
    Sequence Advance Trigger (1037)

    Overrides the Sequence Advance trigger.
    Pulse Trigger (1053)

    Overrides the Pulse trigger.
    Shutdown Trigger (1118)

    Overrides the Shutdown trigger.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • iivrn.png instrument handle out —

    instrument handle out passes the handle used to identify the session in all subsequent NI-DCPower VI calls.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.