NILCRMeasurement Data Structure

Download PDF

Specifies a LCR measurement.

Derives from

None

Namespace: NationalInstruments.ModularInstruments.NIDCPower

public struct NILCRMeasurement

For more information, refer to the NI DC Power Supplies and SMUs Help.

All members of this type are safe for multithreaded operations.


Name	Description
ACCurrent	Measured AC current, in amps RMS.
acInCompliance	Indicates whether the output was in AC compliance at the time the measurement was taken.
ACVoltage	Measured AC voltage, in volts RMS.
Cp	Capacitance, in farads, as measured using a parallel circuit model.
Cs	Capacitance, in farads, as measured using a series circuit model.
D	Dissipation factor of the circuit.
dcInCompliance	Indicates whether the output was in DC compliance at the time the measurement was taken.
Idc	Measured DC current, in amps.
Lp	Inductance, in henrys, as measured using a parallel circuit model.
Ls	Inductance, in henrys, as measured using a series circuit model.
measurementMode	The measurement mode for the measurement.
Q	Quality factor of the circuit.
Rp	Resistance, in ohms, as measured using a parallel circuit model.
Rs	Resistance, in ohms, as measured using a series circuit model.
stimulusFrequency	Frequency of the LCR test signal, in Hz.
unbalanced	Indicates whether the bridge was unbalanced at the time the measurement was taken.
Vdc	Measured DC voltage, in volts.
Y	Complex admittance.
YMagnitude	Magnitude of the complex admittance, in siemens.
YPhase	Admittance phase angle, in degrees.
Z	Complex impedance.
ZMagnitude	Magnitude of the complex impedance, in ohms.
ZPhase	Impedance phase angle, in degrees.