Gets or sets the input terminal for the PulseTrigger.

Syntax

Namespace: NationalInstruments.ModularInstruments.NIDCPower

public DCPowerDigitalEdgePulseTriggerInputTerminal InputTerminal { get; set; }

Remarks

Use this property only when the Type property is set to DigitalEdge. You can specify any valid input terminal for this property. Valid terminals are listed in Measurement and Automation Explorer under the Device Routes tab or in the documentation for your device.

Note

This property is not supported by all instruments. Refer to the Supported Properties by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments.

Specify the input terminal using the form /Dev1/PXI_Trig0, where Dev1 is the instrument and PXI_Trig0 is the terminal. The input terminal can also be a terminal from another instrument. For example, you can set the input terminal on Dev1 to be /Dev2/Engine0/SourceCompleteEvent, where Engine0 is channel 0.

Note

You must specify the input terminal for a PXI-4132 using the form /Dev1/PXI_Trig0, where Dev1 is a PXI-4132 and PXI_Trig0 is the terminal.

Note

To use the per-channel version of this property, you must first initialize the session with the NIDCPower(string, bool, string) constructor. If the session was initialized with a deprecated constructor, use the per-session version of this property instead or include all channels.

Specifies the DCPowerDigitalEdgePulseTriggerInputTerminal value.

Exceptions

TypeDescription
System.ObjectDisposedException

The property was accessed after the associated NIDCPower object was disposed.

Ivi.Driver.OperationNotSupportedException

The property was accessed to unsupported hardware.

Ivi.Driver.SelectorNameException

The property was accessed with an unknown channel name.

System.ArgumentNullException

The property was set with a null input terminal.

Ivi.Driver.IviCDriverException

The underlying NI-DCPower driver returned an error.