Specifies the pulse voltage limit, in volts, that the output cannot exceed when generating the desired current on the specified channel(s) during the off phase of a pulse.

Syntax

NIDCPOWER_ATTR_PULSE_BIAS_VOLTAGE_LIMIT

Numeric Value

Data Type

Access

Applies To

1150089

ViReal64

Read/Write

Channels

Remarks


The limit is specified as a positive value, but symmetric positive and negative limits are enforced simultaneously.

This attribute is applicable only if the NIDCPOWER_ATTR_OUTPUT_FUNCTION attribute is set to NIDCPOWER_VAL_PULSE_CURRENT and the NIDCPOWER_ATTR_COMPLIANCE_LIMIT_SYMMETRY attribute is set to NIDCPOWER_VAL_COMPLIANCE_LIMIT_SYMMETRY_SYMMETRIC.

Note

The channel must be enabled for the specified current limit to take effect. Refer to the NIDCPOWER_ATTR_OUTPUT_ENABLED attribute for more information about enabling the channel.

Note

NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively.

Note

This attribute is not supported by all devices. Refer to Supported Attributes by Device for information about supported devices.

Valid Values: The valid values for this attribute are defined by the values you specify for the NIDCPOWER_ATTR_PULSE_VOLTAGE_LIMIT_RANGE attribute.

High-Level Functions: