NI-DAQmx .NET Framework 4.0 API Reference

Table of Contents

ExternalCalibrationSession.Setup1502 Method

  • Updated2023-02-21
  • 1 minute(s) read
ExternalCalibrationSession.Setup1502 Method
Configures the calibration task for an SCXI-1502 module.

Namespace:  NationalInstruments.DAQmx
Assembly:  NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

Syntax

public void Setup1502(
	string physicalChannels,
	double gain
)
Public Sub Setup1502 ( 
	physicalChannels As String,
	gain As Double
)

Parameters

physicalChannels
Type: SystemString
The physical channel(s) to calibrate.
gain
Type: SystemDouble
The gain setting to calibrate.

Exceptions

ExceptionCondition
DaqExceptionThe NI-DAQmx driver returned an error.

Remarks

You can measure calibration input/output points by supplying reference signals to the specified channel and measuring the outputs.
Note Note
The terminal on which to measure module output depends on the configuration of the module in MAX. National Instruments recommends cabling the module to the digitizer so that the output appears on the MCH0± pins of the rear signal connector.

See Also

Log in to get a better experience