Analog Input:General Properties:Signal Conditioning:Bridge:Configuration
- Updated2025-07-28
- 1 minute(s) read
Specifies the type of Wheatstone bridge connected to the channel.
Remarks
The following table lists the characteristics of this property.
| Short Name | AI.Bridge.Cfg |
| Data type |  |
| Permissions | Read/Write |
| Resettable | True |
| Settable While Task Is Running | device-specific |
| Available in Run-Time Engine | True |
| Full Bridge | 10182 |
Sensor is a full bridge. If you set
AI.Excit.UseForScaling
to TRUE, NI-DAQmx divides the measurement by the excitation value. Many sensors scale data to native units using scaling of volts per excitation.
|
| Half Bridge | 10187 |
Sensor is a half bridge. If you set
AI.Excit.UseForScaling
to TRUE, NI-DAQmx divides the measurement by the excitation value. Many sensors scale data to native units using scaling of volts per excitation.
|
| Quarter Bridge | 10270 |
Sensor is a quarter bridge. If you set
AI.Excit.UseForScaling
to TRUE, NI-DAQmx divides the measurement by the excitation value. Many sensors scale data to native units using scaling of volts per excitation.
|
| No Bridge | 10228 | Sensor is not a Wheatstone bridge. |