Analog Input:General Properties:Digitizer/ADC:Timing Mode

Specifies the ADC timing mode , controlling the tradeoff between speed and effective resolution. Some ADC timing modes provide increased powerline noise rejection. On devices that have an AI Convert clock, this setting affects both the maximum and default values for AIConv.Rate . You must use the same ADC timing mode for all channels on a device, but you can use different ADC timing modes for different devices in the same task.

Remarks

The following table lists the characteristics of this property.

Short Name	AI.ADCTimingMode
Data type
Permissions	Read/Write
Resettable	True
Settable While Task Is Running	device-specific
Available in Run-Time Engine	True

Automatic	16097	Uses the most appropriate supported timing mode based on the Sample Clock Rate.
High Resolution	10195	Increases resolution and noise rejection while decreasing conversion rate.
High Speed	14712	Increases conversion rate while decreasing resolution.
Best 50 Hz Rejection	14713	Improves 50 Hz noise rejection while decreasing noise rejection at other frequencies.
Best 60 Hz Rejection	14714	Improves 60 Hz noise rejection while decreasing noise rejection at other frequencies.
Custom	10137	Use AI.ADCCustomTimingMode to specify a custom value controlling the tradeoff between speed and resolution.