Reference >> Analog Edge >> Slope
- Updated2023-03-16
- 1 minute(s) read
| Data Type: | int32 |
| Description: | Specifies on which slope of the source signal the Reference Trigger occurs. |
Valid values
| DAQmx_Val_RisingSlope | 10280 | Trigger on the rising slope of the signal. |
| DAQmx_Val_FallingSlope | 10171 | Trigger on the falling slope of the signal. |
You can get/set/reset this property using:
DAQmxGetAnlgEdgeRefTrigSlope
DAQmxSetAnlgEdgeRefTrigSlope
DAQmxResetAnlgEdgeRefTrigSlope