Counter Input >> Two Edge Separation >> Second >> Edge
- Updated2023-03-16
- 1 minute(s) read
| Data Type: | int32 |
| Description: | Specifies on which edge of the second signal to stop each measurement. |
Valid values
| DAQmx_Val_Rising | 10280 | Rising edge(s). |
| DAQmx_Val_Falling | 10171 | Falling edge(s). |
You can get/set/reset this property using:
DAQmxGetCITwoEdgeSepSecondEdge
DAQmxSetCITwoEdgeSepSecondEdge
DAQmxResetCITwoEdgeSepSecondEdge