Configuring the Slave NI 9469 Modules
- Updated2025-10-09
- 1 minute(s) read
Complete the following steps to configure the slave NI 9469 modules.
-
Right-click the NI 9469 module you want to configure as a slave in the
Project Explorer window and select
Properties.
The C Series Module Properties dialog box opens.
- Select Slave from the Configuration pull-down menu.
- Place a checkmark in the Import Clock checkbox.
- Click the OK button.
- Repeat Steps 1 through 4 for each additional NI 9469 module you want to configure as a slave.
- Select File»Save All in the Project Explorer window.