Mounting the NI-9147 Directly on a Flat Surface

For environments with high shock and vibration, NI recommends mounting the NI-9147 directly on a flat, rigid surface using the mounting holes in the NI-9147.

What to Use

  • NI-9147
  • Screwdriver, Phillips #2
  • M4 or number 8 screw (x2), user-provided, longer than 23.00 mm (0.91 in.) to pass all the way through the NI-9147

What to Do

Complete the following steps to mount the NI-9147 directly on a flat surface.


1378

  1. Prepare the surface for mounting the NI-9147 using the Surface Mounting Dimensions.
  2. Align the NI-9147 on the surface.
  3. Fasten the NI-9147 to the surface using the M4 or number 8 screws appropriate for the surface. Tighten the screws to a maximum torque of 1.3 N · m(11.5 lb · in.).