Connecting Cables to the NI 5753
- Updated2023-02-17
- 1 minute(s) read
Connecting Cables to the NI 5753
- Use any shielded 50 Ω SMA cable to connect signals to the CLK IN connector on the front panel of your NI 5753.
- Use the SHH19-H19-AUX cable (NI part number: 152629-01 or 152629-02) to connect to the digital I/O (DIO) and programmable function interface (PFI) signals on the AUX I/O connector. NI recommends using the SCB-19 connector block to access the DIO and PFI signals.
- Use an MCX connector to connect signals to the analog input connector on the front panel. You can connect each channel with an individual cable, or you can use the ganged, 16-channel, male MCX to female SMA cable (part number 785244-01).