mmRH-3602 Front/Back Panel and LEDs

Front Panel


1378

Table 14. mmRH-3602 Front Panel Connector Descriptions
Connector Description
TX1/RX1 Transmitter or receiver RF I/O, depending on the configuration.
RX2 Receiver input only. This port can be used to conduct receive measurements when the TX1/RX1 port is transmitting.

Back Panel


1378

Table 15. mmRH-3602 Back Panel Connector Descriptions
Connector Description
LO IN TX LO input for the transmitter.
IF IN IF input for the transmitter.
LO IN RX LO input for the receiver.
IF OUT IF output for the receiver.
DIO 1 Digital I/O from the PXIe-3620 module to control the mmWave radio head.
DIO 0 Digital I/O from the PXIe-3620 module to control the mmWave radio head.
Power Power supply input.
Note The DIO 1 and DIO 0 ports cannot be used simultaneously.
Table 16. mmRH-3602 Back Panel LED Indicators
LED Description Color State Indication
ACCESS Indicates if the radio head is powered. OFF — The radio head is not powered.
Amber Solid or blinking The radio head is in the process of resetting.
Green Solid The radio head is operating.
Red Solid The radio head has encountered an error.
ACTIVE Indicates the configuration status of the radio head. OFF — The radio head is not powered.
Amber Solid or blinking The radio head is being configured.
Green Solid The radio head is powered and ready for configuration.