Interconnecting the Unidirectional SISO (Baseband) Modules
- Updated2023-02-17
- 2 minute(s) read
Interconnecting the Unidirectional SISO (Baseband) Modules
Complete the following steps to connect the modules of the unidirectional SISO (baseband) mmWave Transceiver System configuration.
-
Connect the adjoining PXIe-3630 and
PXIe-7902 High-Speed Serial Instrument modules in the RX chassis using four Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) cables.
- Connect the 0 connector of the PXIe-3630 front panel to the PORT 0 connector of the PXIe-7902 front panel.
- Connect the 1 connector of the PXIe-3630 front panel to the PORT 1 connector of the PXIe-7902 front panel.
- Connect the 2 connector of the PXIe-3630 front panel to the PORT 2 connector of the PXIe-7902 front panel.
- Connect the 3 connector of the PXIe-3630 front panel to the PORT 3 connector of the PXIe-7902 front panel.
Figure 4. Interconnecting the PXIe-3630 and PXIe-7902 Modules
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cables
-
Connect the PORT 4 connector of the PXIe-7902 front panel to the PORT 4 connector of the PXIe-7902 front panel using a Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) cable.
Figure 5. Unidirectional SISO (Baseband) RX Chassis
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cables
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cable
-
Connect the adjoining PXIe-7902 and PXIe-3610 modules in the TX chassis using four Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) cables.
- Connect the PORT 0 connector of the PXIe-7902 front panel to the 0 connector of the PXIe-3610 front panel.
- Connect the PORT 1 connector of the PXIe-7902 front panel to the 1 connector of the PXIe-3610 front panel.
- Connect the PORT 2 connector of the PXIe-7902 front panel to the 2 connector of the PXIe-3610 front panel.
- Connect the PORT 3 connector of the PXIe-7902 front panel to the 3 connector of the PXIe-3610 front panel.
Figure 6. Interconnecting the PXIe-7902 and PXIe-3610 Modules
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cables
Figure 7. Unidirectional SISO (Baseband) TX Chassis
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cables
Disconnect cables or otherwise attenuate the signal to ensure that no signal is entering the baseband ports on the PXIe-3630 module during system startup.