Swapping Device Models in a System
- Updated2023-02-17
- 1 minute(s) read
Swapping Device Models in a System
Quickly replace one device model with another in the Design view.
- Navigate to the Design view.
- Select the device you want to swap for another device.
-
On the
Item tab, select a new device from the
Model drop-down menu.
Note Not all devices support the Model drop-down menu. Complete the following tasks if the device you want to change doesn't have a Model drop-down menu:
- Delete the device model you no longer want to use and add the desired device model from the palette.
- (VISA) If the VISA device is not matched to a device in the Live view, type the device you want into either the Vendor or Model field. If your VISA device is matched to a device in the Live view, you must disable hardware matching before you can replace the device on the Design view. On the document toolbar, click to stop matching devices between the SystemDesigner views.
- Optional: Delete broken wires and wire compatible devices together.
- Optional: Repeat steps 2-4 to replace another device model for a new one.
Related Information
- Designing a Hardware System in the Design View
Use the Design view to design and document a virtual hardware system using hardware you do and do not own.
- Managing Visible Device Ports
Show or hide device ports of PCs and remote controllers in the Design view to organize the system you create.
- Configuring a Device Match in SystemDesigner
Use device matching to apply updates to your live hardware configuration based on changes you make in the Design view.