Settings:SearchAreas:Add Exclude Folder (Method)
- Updated2023-02-21
- 2 minute(s) read
Owning Class: NI DataFinder
Requires: LabVIEW DataFinder Toolkit
Adds to a DataFinder configuration a folder that is to be excluded from a search area. You can use this method only when you are working with a DataFinder that is running on the same machine. The method does not support DataFinder federations.
![]() | Note You cannot create exclude folders that nest inside each other. |
![]() | Note It can take quite some time to add a folder that is to be excluded from the search. During this time the DataFinder is not available. |
![]() | Note Only use the method Add Exclude Folder for the configuration of the DataFinder My DataFinder. |
Parameters
Name | Type | Description | ||||||
---|---|---|---|---|---|---|---|---|
searchArea | Search Area Cluster | Specifies the search area in which the DataFinder excludes a folder from the search.
A search area is a folder that the DataFinder indexes for the search.
| ||||||
path | Path | Specifies the path to the folder that the DataFinder excludes from the search. |
Output Value
None