Generates an array containing a ramp pattern. You must manually select the polymorphic instance you want to use.


icon

Inputs/Outputs

  • cdbl.png delta —

    delta is the interval between two adjacent samples in Ramp Pattern. The default is 0.

  • cdbl.png end —

    end is the ending value, or final value, of Ramp Pattern. The default is 1.

  • cdbl.png start —

    start is the starting value, or first value, of Ramp Pattern. The default is 0.

  • i1ddbl.png Ramp Pattern —

    Ramp Pattern returns the ramp pattern of samples.

    The largest Ramp Pattern this VI can generate depends on the amount of memory in your system, and it is theoretically limited to 2,147,483,647 (231 – 1) elements.

  • ii32.png samples —

    samples is the number of samples of the Ramp Pattern.

  • ii32.png error —

    error returns any error or warning from the VI. You can wire error to the Error Cluster From Error Code VI to convert the error code or warning into an error cluster.

    • Let the sequence X represent Ramp Pattern. For the Ramp Pattern by Samples instance, if type is Linear, the Ramp Pattern VI generates the pattern according to the following equation:

    xi = x0 + iΔx

    for i = 0, 1, 2, …, n – 1

    where x0 is the start. Δx = (end – start)/m. n is the samples. m = n if exclude end? is TRUE. Otherwise, m = n – 1.

    Let the sequence X represent Ramp Pattern. If type is Logarithmic, the Ramp Pattern VI generates the pattern according to the following equation:

    xi = exp[ln(x0) + iΔx]

    for i = 0, 1, 2, …, n – 1

    where x0 is the start. Δx = [ln(end) – ln(start)]/m. start and end must be greater than 0. n is the samples. m = n if exclude end? is TRUE. Otherwise, m = n – 1.

    For the Ramp Pattern by Delta instance, this VI generates the pattern according to the following equation:

    for i = 0, 1, 2, …, n – 1, and

    where x0 is the start, Δx is delta, and [ ] means round towards -Infinity.

    The Ramp Pattern VI does not impose conditions on the relationship between start and end. Therefore, the Ramp Pattern VI can generate ramp-up and ramp-down patterns.

    The following block diagram illustrates how to use the Ramp Pattern VI to generate the ramp pattern of any size greater than or equal to 1.