Connecting to the Power and I/O Accessory for ISC-178x Smart Cameras

Complete the following steps to connect the ISC-178x to the Power and I/O Accessory for ISC-178x Smart Cameras. Refer to the Power and I/O Accessory for ISC-178x Smart Cameras User Manual for more information.
  1. Verify the power source is turned off.
  2. Connect and secure the M12 connector of the terminal block cable to the Power and I/O connector on the smart camera.
  3. Connect and secure the other end of the terminal block cable to the terminal block.
  4. Connect any additional I/O signals necessary for your application to the appropriate signal on the cable or terminal block.
  5. Connect the power supply to the 24 V IN connector on the Power and I/O accessory.
  6. If necessary, connect the power supply cable to the power supply.
  7. Turn on the external power source.