Connecting Directly to the Development Computer

What to Use

  • ISC-178x Smart Camera
  • Development computer
  • M12 to RJ45 Ethernet cable, NI part number 145230-05

What to Do

Complete the following steps to connect the device directly to the development computer.

  1. Verify the development computer is powered on.
  2. Connect the M12 end of the Ethernet cable to the network connector on the ISC-178x.
  3. Connect the RJ45 end of the Ethernet cable to an Ethernet port on the development computer.
  4. Verify the 100/1G LED on the smart camera is on or blinking.