Pins

Use the Pins section on the Pin Map tab to specify the DUT pins and other pin types connected to the tester.

You can right–click any item in the section you want to edit and use the context menu to complete common tasks.

Choose one of the following options to add a pin connection to the pin map file:

  • Click <Add Pins Here> to display the Pins pane, and click the button of the pin type you want to add.
  • Right–click <Add Pins Here> and select the pin type you want to add from the context menu.

The Pin Map Editor automatically adds the pin connection to the Pins section. Select a pin connection in the Pins section to display the Pins pane, where you can edit the pin’s name.

Note Pin names are case sensitive, must begin with a letter or underscore (_), and are limited to A-Z, a-z, 0-9, or _ characters.

You can also cut, copy, and paste pins, or add comments in the Pins pane. Use the Comment button to specify a comment for the selected pin. Comments display beneath the pin they modify.

The ECU Software Toolkit supports the following pin connection types:

  • DUT pin—Specifies a DUT pin, which is a pin on a DUT or a resource on the tester or DIB that is associated with one or more sites.
  • System pin—Specifies a system pin, which is resource on the tester or DIB that is connected to an instrument