Mounting the Device Directly on a Flat Surface

For environments with high shock and vibration, NI recommends mounting the cRIO-9036 directly on a flat, rigid surface using the mounting holes in the cRIO-9036.

What to Use

  • cRIO-9036
  • M4 screw (x6), user provided, which must not exceed 8 mm of insertion into the cRIO-9036

What to Do

Complete the following steps to mount the cRIO-9036 directly on a flat surface.


1378

  1. Prepare the surface for mounting the cRIO-9036 using the Surface Mounting Dimensions.
  2. Align the cRIO-9036 on the surface.
  3. Fasten the cRIO-9036 to the surface using the M4 screws appropriate for the surface. Screws must not exceed 8 mm of insertion into the cRIO-9036. Tighten the screws to a maximum torque of 1.3 N · m(11.5 lb · in.).