Acquire data or output signals by configuring the individual channels of your DAQ device for the measurement or generation.

Add and configure signals to use in your Channel specification.

Configuring Sensors in Your Channel Specification
Add sensors to your project by configuring sensor settings and scaling options for the corresponding channels in the Channel Specification.
Configuring Digital Lines in Your Channel Specification
Add digital lines to a project by configuring signals in the Channel Specification.
Configuring Analog Output in Your Channel Specification
You can add your current or voltage output to the project by configuring signals in the Channel Specification. Configure current or voltage generation by enabling the channel and determining the output settings.
Configuring Counters in Your Channel Specification
Add counters to a project by configuring signals in the Channel Specification.
Configuring Data Rates
Configure the data rate at which your DAQ device acquires data by customizing the data ranges and setting the values for slow, medium, and fast data rates.
Synchronization
Synchronize your system to coordinate inputs within a module or device, between modules in a single chassis, or between multiple devices or chassis.
Scaling Electrical Values to Physical Values
Scale the electrical values of a device to the physical units of a sensor.
Calibrating Multiple Channels Simultaneously
Calibrate more than one channel at the same time.
Reducing Signal Noise
Configure hardware and software filters in FlexLogger to reduce noise in your signals.
Adding an Alarm
Use the Channel Configuration to monitor your signals and trigger an alarm when the selected value conditions are met.
Selecting a Strain Gage
Select a strain gage that meets the needs of your system and application.

Parent topic: Configuring Device Channels

FlexLogger User Manual