Trigger Configuration
- Updated2026-01-12
- 2 minute(s) read
Groups
None
Group members
| Name | Description |
|---|---|
| NIDIGITAL_ATTR_CONDITIONAL_JUMP_TRIGGER_TERMINAL_NAME | Specifies the terminal name from which the exported conditional jump trigger signal may be routed to other instruments through the PXI trigger bus. You can use this signal to trigger other instruments when the conditional jump trigger instance asserts on the digital pattern instrument. |
| NIDIGITAL_ATTR_CONDITIONAL_JUMP_TRIGGER_TYPE | Disables the conditional jump trigger or configures it for either hardware triggering or software triggering. |
| NIDIGITAL_ATTR_DIGITAL_EDGE_CONDITIONAL_JUMP_TRIGGER_EDGE | Configures the active edge of the incoming trigger signal for the conditional jump trigger instance. |
| NIDIGITAL_ATTR_DIGITAL_EDGE_CONDITIONAL_JUMP_TRIGGER_SOURCE | Configures the digital trigger source terminal for a conditional jump trigger instance. The PXIe-6570/6571 supports triggering through the PXI trigger bus. |
| NIDIGITAL_ATTR_DIGITAL_EDGE_RIO_TRIGGER_EDGE | Configures the active edge of the incoming trigger signal for the RIO trigger instance. |
| NIDIGITAL_ATTR_DIGITAL_EDGE_RIO_TRIGGER_SOURCE | Configures the digital trigger source terminal for a RIO trigger instance. |
| NIDIGITAL_ATTR_DIGITAL_EDGE_START_TRIGGER_EDGE | Specifies the active edge for the Start trigger. This property is used when the NIDIGITAL_ATTR_START_TRIGGER_TYPE attribute is set to Digital Edge. |
| NIDIGITAL_ATTR_DIGITAL_EDGE_START_TRIGGER_SOURCE | Specifies the source terminal for the Start trigger. This property is used when the NIDIGITAL_ATTR_START_TRIGGER_TYPE attribute is set to Digital Edge. |
| NIDIGITAL_ATTR_EXPORTED_CONDITIONAL_JUMP_TRIGGER_OUTPUT_TERMINAL | Specifies the terminal to output the exported signal of the specified instance of the conditional jump trigger. |
| NIDIGITAL_ATTR_EXPORTED_START_TRIGGER_OUTPUT_TERMINAL | Specifies the destination terminal for exporting the Start trigger. |
| NIDIGITAL_ATTR_RIO_TRIGGER_TERMINAL_NAME | Specifies the terminal name from which the exported RIO trigger signal may be routed to other instruments through the PXI trigger bus. You can use this signal to trigger other instruments when the RIO trigger instance asserts on the digital pattern instrument. |
| NIDIGITAL_ATTR_RIO_TRIGGER_TYPE | Disables the RIO trigger or configures it for either hardware triggering or software triggering. |
| NIDIGITAL_ATTR_START_TRIGGER_TYPE | Specifies the Start trigger type. |
Attachments
None