SelectedFunction Enumeration
- Updated2026-01-12
- 1 minute(s) read
Specifies which instrument function controls the pin(s). By default, all pins are set to Disconnect.
Syntax
Namespace: NationalInstruments.ModularInstruments.NIDigital
public enum SelectedFunction
Members
| Name | Value | Description |
|---|---|---|
| Digital | 1100 | The pattern sequencer controls the specified pin(s). If a pattern is currently bursting, the pin immediately switches to bursting the pattern. This option disconnects the PPMU. |
| Ppmu | 1101 | The PPMU controls the specified pin(s) and connects the PPMU. The pin driver is in a non-drive state, and the active load is disabled. The PPMU does not start sourcing or measuring until Source or Measure is called. |
| Off | 1102 | Puts the digital driver in a non-drive state, disables the active load, disconnects the PPMU, and closes the I/O switch connecting the instrument channel. |
| Disconnect | 1103 | The I/O switch connecting the instrument channel is open to the I/O connector. If the PPMU is sourcing, it is stopped prior to opening the I/O switch. |
| Rio | 1104 | Yields control of the specified pin(s) to LabVIEW FPGA. |