PXIe-6570 Firmware 16.0.0f2 0 Ratings | 0.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on ni.com. Before downloading, click here to review this information.

Download Language: English

Product Line: High-Speed Digital I/O

Version: 16.0

Release date: 11-23-2016

Software type: Firmware

Operating system: Windows 10 64-bit; Windows 7 (SP1) 64-bit

Installation Instructions

  1. Ensure the NI-Digital Pattern Driver and Digital Pattern Editor 16.0 software is installed. If it is not installed, you may download it from: http://www.ni.com/download/ni-digital-pattern-driver-16.0/6435/en/
  2. Download the new firmware file PXIe-6570_16_0_0f2.cfg
  3. Launch NI MAX, expand Devices and Interfaces and select the NI PXIe-6570 instrument to be updated.
  4. Select ‘Update Firmware’. A dialog box will open prompting you to select the firmware file.
  5. Navigate to where you saved the file PXIe-6570_16_0_0f2.cfg and select it. Once the file has been selected, an option for beginning the update will be provided to you.
  6. Press ‘Begin Update.’ A ribbon will now show in MAX indicating that firmware update is in progress.
    This process will take between 2 and 3 minutes. Do not power down the system during the update.
  7. Close NI MAX.
  8. Power down the chassis. To finalize the firmware upgrade, a complete shutdown is required. A reboot is not sufficient.
  9. Power on the system. Once Windows has booted successfully, launch NI MAX again and select the same device you updated firmware on. The device should now display 16.0.0f2 as the firmware version.

Supported hardware

The following devices are supported for use with this download:

  • PXIe-6570

Your Feedback

Rate this document

Answered Your Question?
Yes No

Submit