C Series with LEMO Front Connection: I/O Cable & Accessory Guide

Publish Date: Jul 10, 2017 | 0 Ratings | 0.00 out of 5 | Print


Use this guide to match your C Series Modules with LEMO terminal front connection with a compatible cable and accessory to meet the needs of your application, whether you are creating a new configuration, replacing or expanding your current configuration, or verifying that existing parts can be used in a different configuration.

This page is part of the C Series I/O Cable and Accessory Compatibility Guide.

Table of Contents

  1. Using this C Series I/O Cable and Accessory Guide
  2. Finding Your C Series Module
  3. Cable and Accessory Compatibility Tables 
  4. Ordering Information
  5. Glossary of Terms Used
  6. Additional Resources

1. Using this C Series I/O Cable and Accessory Guide

This guide is intended to cover connectors and cables for use with C Series Modules. It does not explicitly cover other NI product families such as DAQ Multifunction I/O, Digital Waveform Instruments (formerly HSDIO), or R Series. It also does not cover legacy or End of Life (EOL) parts or products. Additionally, these products are supported in cRIO and/or cDAQ chassis, but this guide does not cover chassis accessories.

Note: Using the page search functionality in your browser to locate your model may speed up this process. This is typically CTRL+F on Windows or ⌘+F on MacOS.


Back to Top

2. Finding Your C Series Module

This page is arranged by first having you identify the connector type on your C Series Module, locating the information for your specific model, and then choosing the accessory or cable combination that best fits your needs.

How to identify the model number of your C Series Module:

The model number of the C Series Module is printed on the faceplate of the actual module and also in the Getting Started that ships with the module.

Back to Top

3. Cable and Accessory Compatibility Tables 

Figure 1: C Series with LEMO Terminal Front Connection

Note: N/A= Not Applicable

Cable & Accessories for C Series Module with LEMO connection
Modules Cable Power Connection
NI-9218 NI 9982L, LEMO Screw Terminal Block

P/N: 783410-01

NI 9983L, LEMO Current Shunt Adapter 0-20mA P/N: 783412-01

NI 9984L, 1/4 Bridge 120 Ohm

P/N: 783414-01

NI 9985L, 1/4 Bridge 350 Ohm

P/N: 783416-01

NI 9986L, 1/2 Bridge

P/N: 783418-01

NI 9987L, LEMO 60 V Voltage Adapter

P/N: 783420-01

LEMO Female to Pigtail I/O Cable, 1M

P/N: 158293-01

LEMO Female to Pigtail I/O Cable, 2M

P/N: 158293-02


P/N: 784162-01

Extra Power Connectors for NI 9218 LEMO

P/N: 784161-01

2-Pos Micro-Fit Plug And Crimp Terminal Kit P/N: 783799-01


Back to Top

4. Ordering Information

For more information on any of the listed NI orderable parts, please visit http://www.ni.com/contact-us/ to contact an NI representative. Most NI orderable parts listed in this guide without a product page can still be purchased by contacting NI.


Back to Top

5. Glossary of Terms Used

  • EMI Suppression Ferrite - Passive electrical component clamped around a cable to reduce Electromagnetic Interference (EMI) on the line. Click here for an example.


Back to Top

6. Additional Resources

Back to Top

Bookmark & Share


Rate this document

Answered Your Question?
Yes No