Battery Clamp Inspection

Publish Date: Dec 28, 2015 | 2 Ratings | 1.00 out of 5 | Print | Submit your review

Overview

Signal Processing Resource Center » Vision Development Module Image Processing Examples Battery Clamp Inspection

This example loads a template image that is matched in each new image to locate the new coordinate system. The example repositions measurement areas in the image according to the location of the coordinate system found. The example performs a distance measurement between two edges of the part inspected by using a clamp. The example then performs a diameter measurement using a circular edge finder.

1. Front Panel

This example requires LabVIEW and is included with the Vision Development Module. Download the Vision Development Module Evaluation to try this example. After installing the software, open LabVIEW and navigate to Help » Find Examples... » Toolkits and Modules.

 

Back to Top

2. Related Links

 

Back to Top

Bookmark & Share


Ratings

Rate this document

Answered Your Question?
Yes No

Submit