Bitlis-MEN LLC, an NI Silver Alliance Partner, offers safe and simple engineering solutions for automating customer systems. We can provide customers with ease of operation and they can see and manage their businesses anytime and anywhere—from home, office, or even while traveling. Our experience, competence, and the innovations and advanced technologies we use help us meet the needs of our clients all over the world. We can also provide a partial automation of the system, namely the automation of the assemblies and units.
Our Substation Automation System is an advanced power quality monitoring and events detection system. We combined it with remote monitoring and electrical network apparatus control, operating under a single, integrated application software and a state-of-art field data acquisition hardware capable of implementing both functions internally from a single box. The system is centralized and provides remote web monitoring with clients.
The SCADA system for substation monitoring and power quality analysis is Windows-based and monitors seven RTUs (Remote Terminal Unit) (366 physical I/O, 511 calculated I/O). The system includes the following power analysis: basic parameters, THD (Total Harmonic Distortion), harmonic analysis up to 64th order, harmonics per cycle, harmonics per second, voltage events, voltage unbalance, load impedance, flicker, vector diagram, waveform streaming, and more. The system monitors and controls the Royal Commission’s MV and LV substations. The equipment list includes MV, LV switchgears, isolators, and transformers. The system also includes historical trending, alarm and event handling, email notification, and more. We used the DNP3.0 for communication.
Our system provides real-time power grid monitoring and control. It displays the Royal Commission’s single-line diagram of the power distribution substations and its apparatus (transformers, isolators, switchgears, generators, ATS, battery chargers, and more) and gives the operator the ability to view the variable values in real time, on user-friendly and ergonomic human machine interface (HMI) screens, and on multiple displays.
The system features two operator workstations, which allow multiple operators to access the information at the same time. They incorporate the HMI, system configuration, and report generation with different user access and authority levels.
A main operator workstation includes two 42-in. screens, which can display different views with the full information required for monitoring and control. It is password-protected and may grant operator- or supervisor-level access.
The HMI displays an overview of the Royal Commission electrical distribution network system. A single-line diagram is available for the complete subsystem and displays the status for various equipment and selected parameter values. Additionally, the following alarms and event lists are displayed:
- Control function, in the form of closing or opening switchgear
- An audio/visual alarm warning after detecting any malfunction, fault, or when the parameters exceed critical limits
- All activities, including the operating switchgears, statuses, warnings, fault alarms, and more logged (with date, time, and location) with millisecond time resolution
- Servers run Windows 7 with all supported programs and supervisory software
The system contains seven sites (five RTUs and two subRTUs). For the system expansion there must be 81 sites.
Specialized software offers an opportunity to control and monitor the SCADA and configure settings:
- Switch breaker control (open/close)
- Switch breaker connectivity status (disconnected/connected)
- Switch breaker rack in/out status
- Live monitoring and historical trending of all alarms and events
- RTU health status
- Power parameters
- Basic analysis (voltage RMS, current RMS, frequency)
- Power analysis (active/reactive/apparent powers, power factor, vector diagram for voltage and current)
- Local settings (per RTU/site)
- Data scaling
- Data deadbanding
- Alarm handling
- Analog signals
- Digital signals
- Global settings
- Watchdog listening rate
- User settings
System Features and Benefits
- The system presents the complete SCADA system.
- The system is integrated, providing both the power quality analysis and remote monitoring and control from a single field data acquisition hardware (in a given location) and a single software package (control center).
- The smart RTU acts as an RTU for remote monitoring and control and also computes power quality analysis without needing to acquire the information from third-party power quality analyzers.
- The automatic monitoring and control units (RTU) of substations are implemented using the CompactRIO platform.
- The specialized control software is implemented with the LabVIEW graphical programming language.
- The software visualizes the virtual operating diagrams (single-line diagram) of the substations and allows interactive monitoring and control over any existing apparatus.
- The system is centralized and provides remote web monitoring with clients.
Combining the benefits of the CompactRIO FPGAs and processor we developed a rugged, permanent monitoring and control system that performs real-time analysis and control of a local power grid from a centralized location. We successfully installed our substation automation system in the Kingdom of Saudi Arabia.