NI Device Drivers 2014.08 Part 1 96 Ratings | 3.65 out of 5 |   Print

Available Downloads:

Need previous versions? Access your SSP benefits by logging in.
Updates and Notifications:
Critical Updates and Security Notifications are posted on ni.com. Before downloading, click here to review this information.
Supporting Files:

Download Language: Chinese (Simplified); English; French; German; Japanese; Korean

Product Line: Device Drivers

Version: August 2014

Release date: 08-04-2014

Software type: Driver

Operating system: Windows 8; Windows 7; Windows XP (SP3) 32-bit; Windows Server 2008 R2 64-bit; Windows Server 2003 R2 32-bit

Description

NOTE: Please read installation instructions before continuing!

NI Device Drivers August 2014 contains the following drivers: 

  • Data Acquisition
    • NI-DAQmx
  • Instrument Control
    • NI-488.2
    • NI-VISA
    • NI-Serial
    • IVI Compliance Package
  • Modular Instruments
    • NI-Switch
    • NI-DMM
    • NI-Scope
    • NI-FGEN
    • NI-DCPower
    • NI-HSDIO
  • Timing & Synchronization
    • NI-Sync *
    • NI-TimeSync
  • Reconfigurable I/O
    • NI CompactRIO
    • NI R Series
    • NI FlexRIO
  • Motion and Vision
    • NI-Motion
    • NI-IMAQ
    • NI-IMAQdx
    • NI-IMAQ I/O
  • Real-Time and Embedded
    • NI-488.2
    • NI-Serial
  • Communication Buses and Protocols
    • NI-XNET
  • NI System Configuration


Driver Version Naming Changes
Driver versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: . For example, NI-DAQmx 14.0.0 is the version released with LabVIEW 2014. The last version released under the old numbering scheme is NI-DAQmx 9.9. The first version released under the new numbering scheme is NI-DAQmx 14.0.0.

Installation Instructions

Note: The NI Device Drivers is separated into two downloads. This page contains the download for Part 1. The download for Part 2 is located on a separate page.

  1. Download both Part 1 (dcd_Aug14_1_downloader.exe) and Part 2 (dcd_Aug14_2_downloader.exe). These are smaller helper files that manage the download of the larger driver. 
  2. When prompted, save these files to a temporary location.
  3. Launch both files to download the driver. If you receive a security warning, click Run to continue.
  4. When prompted, save the driver software installer files to a temporary folder. The download of the driver software should now start through the National Instruments Downloader.
  5. After downloading completes, open dcd_Aug14_1.exe to launch the first self-extracting executable. You must open dcd_Aug14_1.exe first.
  6. Select the file path to which you want to extract the driver files and click OK. . The default location is C:\National Instruments Downloads\NI Device Drivers\Aug14.
    The self-extracting exe will automatically be deleted from your hard drive upon completion.
  7. Repeat steps 5-6 for dcd_Aug14_2.exe. The NI Device Drivers installer will run after you run dcd_Aug14_2.exe.
    After installation, you may delete the driver installation files to recover space on your hard drive. 

Your Feedback

Rate this document

Answered Your Question?
Yes No

Submit